CX2550 M1
Operating Manual
51
8
Troubleshooting and tips
V
CAUTION!
Follow the safety instructions in the "Safety notes and regulations"
manual or "
安全上のご注意
" and in chapter
"Important information" on
page 21
.
If a fault occurs, attempt to resolve it using the measures described:
– in this chapter,
– in the documentation for the connected devices,
– in the help systems of the software used.
8.1
Power-on indicator remains unlit
The power-on indicator remains dark after you switch on your device.
Power cable incorrectly connected
Ê
Make sure that the power cable(s) is/are correctly connected to the server
node and the grounded power outlet(s).
Power supply overloaded
Ê
Disconnect the server node power plug(s) from the grounded power
outlet(s).
Ê
Wait a few minutes before you plug it/them into the grounded power outlet(s)
again.
Ê
Switch on your server node.
8.2
Server node switches itself off
Server Management has detected an error
Ê
Check the error list of System Event Log in ServerView Operations Manager
or in the iRMC S4 web interface, and attempt to eliminate the error.
