CX2550 M1
Operating Manual
45
Starting up and operation
Other On/Off options
Besides the On/Off button, the server can be switched ON and OFF in the
following ways:
–
Wake up On LAN (WOL)
The server is switched on by a command via the LAN (Magic Packet™).
–
After power failure
The server automatically reboots following a power failure (depending on the
settings in the BIOS or in iRMC S4).
–
Power button override
The system can be switched off (hard power off) by holding down the On/Off
button (approximately 4 - 5 seconds).
V
CAUTION!
There is a risk that data may be lost.
–
iRMC S4
iRMC S4 offers various options for switching the server on and off, e.g. via
the
Power On Off
page of the iRMC S4 Web interface.
V
CAUTION when turning the power off
(Windows Server 2008)!
The operation of the power switch can be specified as "Do Nothing",
"Stand by", "Hibernate", and "Shutdown" depending on the OS settings.
The default is "Shutdown".
On this server, functions corresponding to "Stand by" and "Hibernate" are
not supported as BIOS and hardware functions.
For details about operating mode settings, refer to the manual supplied
with the OS.
