78
Upgrade and Maintenance Manual
BX920
S4
Basic software procedures
©
c
o
gn
ita
s.
G
e
se
lls
ch
ft fü
r T
ech
n
ik
-D
o
ku
m
en
ta
tio
n
m
b
H
2
0
14
Pf
a
d:
C
:\P
ro
g
ra
m
m
e
\F
C
T
\ti
m
_a
pp
\ti
m
_l
oca
l\w
or
k\PI
C
H
O
L\
O
B
J_
D
O
KU
-1
9
86
8-
00
1.
fm
Ê
Remove the server blade from the system unit as described in section
"Removing a server blade" on page 54
Ê
Open the server blade as described in section
Ê
Turn switch 3 of the user DIP switch bank to OFF, see section
Ê
Close the server blade as described in section
Ê
Reinstall the server blade in the system unit as described in section
"Installing the server blade in the system unit" on page 58
.
Ê
Switch on the server blade as described in section
.
Ê
You can now put the server blade back into operation.
5.2.1.2
Updating or recovering the iRMC
TFTP update procedure
Ê
Log in to the management blade web interface.
Ê
Open the
Information / Operation – Operation – Firmware Update
menu.
Ê
Open the
Server Blade
tab.
Ê
In the
Server Blade to be Updated
box select the desired server.
Ê
In the
Update settings
box select the update firmware (iRMC).
Ê
In the
Update settings
box enter the TFTP IPv4 or IPv6 address of the TFTP
server and the pathname of the TFTP firmware file.
I
For more detailed information, refer to the
Help – On Page
function of
the management blade web interface.
Ê
Click the
Apply
button to start the update process.
The status column in the
Server Blade to be Updated
box provides information
on the update progress.
V
CAUTION!
Do not interrupt the iRMC upgrade process after it has started. If the
process is interrupted, the iRMC may be permanently corrupted.
