BX920 S2
Operating Manual
47
Configuring the Server Blade
–
Wizard-assisted creation of configuration files for unattended installation of
several PRIMERGY servers with identical hardware configurations.
–
Installation of drivers and additional software.
I
The software that can be installed depends on your server’s hardware
configuration. This configuration is detected automatically.
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the corresponding readme files on the driver
CDs.
To find out how to operate the ServerView Installation Manager and for further
information, refer to the associated manual.
If you are using the ServerView Installation Manager, you can skip the following
section on how to configure the server and install the operating system.
Continue from section
"Cleaning the Server Blade" on page 48
.
5.3.4
Configuring the server and installing the operating
system without ServerView Installation Manager
Configure SAS RAID controller with "Integrated Mirroring Enhanced"
Configure the controller as described in section
"Configuring SAS RAID
controller" on page 46
.
Configure SAS/SATA RAID controller with "MegaRAID functionality"
Configure the controller as described in section
"Configuring SAS RAID
controller" on page 46
.
Installing the operating system
Ê
Insert the DVD for the operating system you want to install.
Ê
Reboot the server blade.
Ê
Follow the instructions on screen and in the manual for the operating
system.