PRIMERGY BX600 S2 Basic Unit
33
Installing the Hardware
Installation Steps
4
Installing the Hardware
V
CAUTION!
Please note the safety instructions in the
chapter “Important Notes” on
page 21
.
Do not expose the PRIMERGY BX600 S2 basic unit to extreme environ-
mental conditions (see
section “Technical Data” on page 15
). Protect it
from dust, moisture, and heat.
4.1
Installation Steps
The installation steps are described in detail in the following sections of this
chapter:
●
Unpacking the basic unit (see
section “Unpacking the Basic Unit” on
page 34
).
●
Mounting the basic unit in the rack (see
section “Installing the System in the
Rack” on page 35
and also the layout arrangement on the order lists).
●
Cabling the basic unit (see
section “Connecting External Devices” on
page 41
). See also the
section “Cable Routing” on page 43
and the
section
“Instructions on Connecting and Disconnecting Cables” on page 45
.
●
Connecting the basic unit to the mains voltage (see
section “Connecting the
System to the Mains” on page 46
).
