Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 375 / 446

C122-E001-10EN C-1
Appendix C Power Control
A
This appendix describes the power-on/off procedures.
• Power-On/Off Procedures for the Main Unit (
→
C.1 )
•
Power Control on Cabinets and Partitions (
→
C.2 )
•
Powering On and Powering Off Partitions (
→
C.3 )
C.1 Power-On/Off Procedures for the Main Unit
This section describes the power-on/off procedures for the main unit, including the
following:
z
Powering on and off by controlling the main power (
→
C.1.1 )
z
Power-on and power-off procedures for the entire system (
→
C.1.2 )
C.1.1 Powering on and off by controlling the main power
This section explains powering on and off through control of the main power.
The circuit breakers of the PRIMEQUEST 580A/540A/580/540/480/440 are the main
power switches on the main unit. They also work as circuit protectors that protect the
main unit by detecting overcurrents.
Note: FAN_E#0 and FAN_E#1 of the PRIMEQUEST 520A/520/420 series
machine rotate not only when the system is operating, but also when it is
on standby.
z
Power-on procedure using circuit breakers (PRIMEQUEST 580A/540A/580/540/
480/440) (
→
C.1.1.1 )
z
Power-on procedure (PRIMEQUEST 520A/520/420) (
→
C.1.1.2 )
z
Power-off procedure using circuit breakers (PRIMEQUEST 580A/540A/580/540/
480/440) (
→
C.1.1.3 )
z
Power-off procedure (PRIMEQUEST 520A/520/420) (
→
C.1.1.4 )