Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 386 / 446

C-12 C122-E001-10EN
Appendix C Power Control
C.2 Power Control on Cabinets and Partitions
This section describes power control procedures for the entire PRIMEQUEST system
and for partitions.
Note: A partition in which Windows is installed may not be shut down when the
shutdown function is executed from the MMB Web-UI. To turn off power
to the partition, use the Windows shutdown function. For details on the
Windows shutdown function, see the PRIMEQUEST 580A/540A/520A/
500/400 Series Reference Manual: Basic Operation/GUI/Commands
(C122-E003EN).
Remarks: The procedures described below show sample screenshots of windows
displayed for the PRIMEQUEST 580A/540A/580/540/480/440.
Procedure
1 Click [System]
→
[System Power Control] from the MMB menu.
The [System Power Control] window is displayed.
Figure C.7 [System Power Control] window
2
Select a power control mode and click the [Apply] button.
3 Click [Power Off the Chassis (all partition(s) will be automatically shutdown)] or
[Force Power Off], a confirmation window appears. In the confirmation window,
click the [OK] button to start processing or the [Cancel] button to return to the
main window without performing processing.