Fujitsu PG-HD6G1C, User Manual

Page: 12 / 16

2
2.2 Drive number (SCSI) Settings
Pin
SCSI ID Settings
Drive number Pin number:1-2 Pin number:3-4 Pin number:5-6 Pin number:7-8
#0 Open Open Open Open
#1 Short Open Open Open
#2 Open Short Open Open
#3 Short Short Open Open
#4 Open Open Short Open
#5 Short Open Short Open
#6 Open Short Short Open
#7 Short Short Short Open
#8 Open Open Open Short
#9 Short Open Open Short
#10 Open Short Open Short
#11 Short Short Open Short
#12 Open Open Short Short
#13 Short Open Short Short
#14 Open Short Short Short
#15(*1) Short Short Short Short
(*1) SCSI-ID setting is #6 at shipment.
2.3 Jumper Settings
Pin number Setting Description Pin Setting Factory Setting
9-10 Write Protect Enables the Write Protect mode Short
Disables the Write Protect mode Open
○
11-12 Motor Start Activates the motor at power ON. Short
Activates the motor from the START Open
○
UNIT command.
13-14 Force Narrow Forcibly uses a Narrow SCSI Short
Forcibly uses a Wide SCSI Open
○
15-16 Force Single Forcibly uses a SE Short
Ended Forcibly uses LVD Open
○
17-22 N.C Not used Open
23-24 Terminator Power Terminator power ON Short
○
Supply Terminator power OFF Open
SE : Single ended
LVD : Low Voltage Differential