Fujitsu P8010 - LifeBook - Core 2 Duo 1.2 GHz User Manual Download

Page: 19 / 195

- Locating the Controls and Connectors

Front and Display Components

The following is a brief description of your LifeBook notebook’s front and display features.

Web Camera

The optional 1.3 MP web camera allows you to capture and share pictures of yourself over the internet.

Display Panel

The display panel is a color LCD panel with back lighting for the display of text and graphics and touch
screen functionality.

Status Indicator Panel

The Status Indicator Panel displays symbols that correspond to specific components of your LifeBook
P8010 Series notebook.

See “Status Indicator Panel” on page 27.

LifeBook Application Panel Buttons

The LifeBook P8010 Series notebook application panel buttons provide application launch capabilities.

See “LifeBook Application Panel/Support Button” on page 39.

[Suspend/Resume] Button

The [Suspend/Resume] button allows you to suspend system activity without powering off, resume your
system from standby mode, and power on your system when it has been shut down from the Windows
operating system.

See “Power On” on page 50.

Stereo Speakers

The built-in dual stereo speakers allow you to listen to sound from your system.

Keyboard

A full-function keyboard with dedicated Windows keys.

See “Keyboard” on page 31.

Touchpad Pointing Device

The Touchpad pointing device is a mouse-like cursor control with three buttons (left, right, and fingerprint
sensor/scroll button).

See “Touchpad Pointing Device” on page 34.

Summary of Contents for P8010 - LifeBook - Core 2 Duo 1.2 GHz




































































































































































































Search results

Summary of Contents for P8010 - LifeBook - Core 2 Duo 1.2 GHz

Reviews:

Related manuals for P8010 - LifeBook - Core 2 Duo 1.2 GHz

Brands by name

Popular brands

Fujitsu P8010 - LifeBook - Core 2 Duo 1.2 GHz, User Manual

Search results

Summary of Contents for P8010 - LifeBook - Core 2 Duo 1.2 GHz

Reviews:

Related manuals for P8010 - LifeBook - Core 2 Duo 1.2 GHz

Brands by name

Popular brands