E-38
OTHER SETTINGS (FEATURES MENU) (Continued)
Adjusting the settings so that the standby state automatically
starts up if the display remains in no signal state for an
extended amount of time.
Selecting the background setting to indicate when the display
is in the no signal state.
Time
(1) Press
to select the "Time".
(2) Press
to select the amount of time before the standby
state starts.
Press
to store.
* The numerical value is the approximate amount of time
before the standby state starts.
Back ground
(3) Press
to select the "Background".
(4) Press
to select the display background color.
Black
White
Press
to store.
* The background color changes to assigned color state
after approximately 20 seconds in the no signal state.
Selecting the available terminals to receive audio from the
input equipment .
(1) Press
or
to select video input terminal.
(2) Select a related audio input terminal.
Each time you press
or
, one of the available choices
appears in the following sequence:
[No audio]
: No audio in the corresponding mode. (No
audio is output even when this video input
mode is selected.)
[Audio 1-]
: Selects Audio 1 through 3 for receiving audio
in the corresponding mode.
* For the audio input terminals, see "CONNECTING TO
EXTERNAL EQUIPMENT" (P. E-15) and EXAMPLE OF
CONNECTING EXTERNAL EQUIPMENT" (P. E-16).
Press
to store.
* Audio Input menu will not be displayed when "No Audio" is
selected.
You can use this option to move the screen position to
minimize phosphor-induced "burn-in".
Mode/Time
(1) Press
or
to select "Mode/Time".
(2) Select a desired pattern.
Each time you press
or
, one of the available choices
appears in the following sequence:
[Off]
: Disables Screen Orbiter.
[Time]
: Moves the pattern approximately every one hour.
[Mode]
: Moves the pattern when the power is turned ON
or when you switch between modes.
Moving Area
(3) Press
or
to select "Moving Area".
(4) Press
or
to select the range for moving the pattern.
Each time you press
or
, one of the available choices
appears in the following sequence:
[Min.]
: Pattern moves in small range. (About 5 pixels)
[Std.]
: Pattern moves in moderate range. (About 10 pixels)
[Max.]
: Pattern moves in wide range. (About 15 pixels)
(5) Press
to store.
* When the Screen Orbiter function is operated, some
screen contents. at the top, bottom, right or left of the
screen may move offscreen.
SETTING OTHERS
Auto Off-NO SIG.
Audio Input
"Auto Off-NO SIG." settings screen
"Audio Input" selection screen
Screen Orbiter (RGB)
"Screen Orbiter" setting screen
MHD02098‑01̲E.book 38 ページ ２００５年１２月２８日 水曜日 午前９時１６分
