E-17
English
Deutsch
Espa
ñol
Fran
ç
ais
Ital
iano
Portugu
ê
s
日 本 語
Póññêèé
中文
BASIC OPERATIONS
Turn "ON" the power.
1
Press
.
The power is turned on, and the power lamp changes
from "Red" to "Green."
Select the Video, RGB, or TV mode to
enable ordinary operation.
* Make sure that the power cord is connected to a 3-
core receptacle in advance. (See P. E-11 of "BASIC
CONNECTION AND PREPARATION OF THE
SYSTEM")
Turn "OFF" the power (the plasma display placed in
standby state).
1
Press
when the power is "ON."
The power lamp changes from "Green" to "Red" and the
plasma display becomes the standby state.
The volume can be adjusted.
To increase the volume, press
.
To decrease the volume, press
.
* Note that the volume level remains stored even when
you turn OFF the power.
* An audio signal from an audio output terminal
(AUDIO OUTPUT DIGITAL or AUDIO OUTPUT
ANALOG) does not change.
The sound can be temporarily muted.
Press
.
The sound is muted.
To restore the original sound volume, press the button
again.
The volume can also be restored by pressing
or
.
* An audio signal from an audio output terminal
(AUDIO OUTPUT DIGITAL or AUDIO OUTPUT
ANALOG) does not change.
Power ON
Power OFF (standby state)
VOL (Volume)
MUTE
View when
or
is pressed
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Some functions may not be available depending on the model or optional equipment.
MHD02098‑01̲E.book 17 ページ ２００５年１２月２８日 水曜日 午前９時１６分
