manualshive.com logo in svg

Fujitsu MHY2040BH, Product/Maintenance Manual

The Fujitsu MHY2040BH Product Maintenance Manual is a comprehensive and essential resource for users of this high-performance hard drive. Packed with detailed instructions and troubleshooting tips, this manual is available for free download at manualshive.com. Ensure optimal performance and longevity of your device with this invaluable manual.

Share
Download
background image

 

5.3  Host Commands 

C141-E262 

5-57 

Table 5.9  Features Field values (subcommands) and functions (3/3) 

Features Field 

Function 

X 'D9' 

SMART DISABLE OPERATIONS: 

This subcommand disables SMART.  The setting is maintained even when 
the device is turned off and then on. 

When the device receives this subcommand, it disables SMART, then 
transfers the RegDH. 

X 'DA' 

SMART RETURN STATUS: 

When the device receives this subcommand, it saves the current device attribute 
values.  Then the device compares the device attribute values with guarantee 
failure threshold values.  If there is an attribute value exceeding the threshold, 
F4h and 2Ch are loaded into the Cylinder Low and Cylinder High field.  If there 
are no attribute values exceeding the thresholds, 4Fh and C2h are loaded into the 
Cylinder Low and Cylinder High field.  After the settings for the Cylinder Low 
and Cylinder High field have been determined, the device transfers the RegDH. 

X 'DB' 

SMART ENABLE/DISABLE AUTO OFF-LINE: 

This sets automatic off-line data collection in the enabled (when the Sector 
Count field specification 

≠ 

00h) or disabled (when the Sector Count field 

specification = 00) state.  This setting is preserved whether the drive's power 
is switched on or off. 
If 24 hours have passed since the power was switched on, or since the last 
time that off-line data were collected, off-line data collection is performed 
without relation to any command from the host computer. 

 

The host must regularly issue the SMART READ DATA subcommand (Features 
field = D0h), SMART SAVE ATTRIBUTE VALUES subcommand (Features 
field = D3h), or SMART RETURN STATUS subcommand (Features field = 
DAh) to save the device attribute value data on a medium. 

Alternative, the device must issue the SMART ENABLE-DISABLE 
ATTRIBUTE AUTOSAVE subcommand (Features field = D2h) to use a feature 
which regularly saves the device attribute value data to a medium. 

In this drive, this function is enabled at the shipment from the factory. 

The host can predict failures in the device by periodically issuing the SMART 
RETURN STATUS subcommand (Features field = DAh) to reference the Cylinder 
Low and Cylinder High field. 

If an attribute value is below the guarantee failure threshold value, the device is 
about to fail or the device is nearing the end of its life.  In this case, the host 
recommends that the user quickly backs up the data. 

 

Summary of Contents for MHY2040BH



































































































































































































































































































































Reviews:

No comments

Related manuals for MHY2040BH

Rorke Data A16F-R2431 Galaxy Raid Installation And Hardware Reference Manual preview
A16F-R2431 Galaxy Raid
Brand: Rorke Data Pages: 110
Swiss Aqua Technologies SATDKOSPRBB Mounting Instruction preview
SATDKOSPRBB
Brand: Swiss Aqua Technologies Pages: 5
SanDisk CompactFlash 5000 Product Manual preview
CompactFlash 5000
Brand: SanDisk Pages: 20
SilverStone TOWER STORAGE TS421S Manual preview
TOWER STORAGE TS421S
Brand: SilverStone Pages: 52
Tandberg Data SDLT220 Product Manual preview
SDLT220
Brand: Tandberg Data Pages: 142
Oracle storagetek sl150 Library Manual preview
storagetek sl150
Brand: Oracle Pages: 196
Husky H56MWC5GBXD Use And Care Manual preview
H56MWC5GBXD
Brand: Husky Pages: 10
Huawei SmartLi Series User Manual preview
SmartLi Series
Brand: Huawei Pages: 116
Huawei V100R002 User Manual preview
V100R002
Brand: Huawei Pages: 97
Panasonic RP-SDUB64GAK Owner'S Manual preview
RP-SDUB64GAK
Brand: Panasonic Pages: 8
Panasonic RP-SDUA32GUK Owner'S Manual preview
RP-SDUA32GUK
Brand: Panasonic Pages: 8
Panasonic RP-SDU32GU1K Operating Instructions Manual preview
RP-SDU32GU1K
Brand: Panasonic Pages: 8
Panasonic RP-SDRC64GAK Owner'S Manual preview
RP-SDRC64GAK
Brand: Panasonic Pages: 8
Panasonic RP-SDRB32GAK Owner'S Manual preview
RP-SDRB32GAK
Brand: Panasonic Pages: 8
Panasonic RP-SDP16GU1K Operating Instructions Manual preview
RP-SDP16GU1K
Brand: Panasonic Pages: 6
Panasonic RP-SDLA02GUK Operating Instructions Manual preview
RP-SDLA02GUK
Brand: Panasonic Pages: 8
Panasonic FZ-VSD55 Series Operating Instructions Manual preview
FZ-VSD55 Series
Brand: Panasonic Pages: 8
Panasonic CF-VFS372 Operating Instructions preview
CF-VFS372
Brand: Panasonic Pages: 4

Brands by name

Popular brands

Load more brands