Preliminary
22(30)
Prepared
Document Number
Manfred Ortmann
Approved
Checked
Date
Revision
Storage
2008-05-23
PA 6.2
Mycable01
2.2.11 Video Outputs
Pic. 2-16: Video output connectors
The digital RGB video output 0 from the LIME is connected to connector X402, transmitter
SiI164CT64 ( U400 ) and triple 8-Bit high speed video
digital-to-analog converter
(
DAC )
ADV7125JSTZ240 ( U402 ).
The digital RGB video output 1 from the LIME is connected to connector X403, transmitter
SiI164CT64 ( U401 ) and triple 8-Bit high speed video
digital-to-analog converter
(
DAC )
ADV7125JSTZ240 ( U403 ).
The type from X402 and X403 is FTSH-120-01-L-DV-EJ-P from Samtec, mate with Samtec
types FFSD , CLP , FLE , SFMC , SFMH , TFMDL.
The transmitter SiI164CT64 ( U400 and U401 ) from Silicon Image uses PanelLink® Digital
technology to support displays ranging from VGA to UXGA resolutions ( 25 – 165 Mpps ) in a
single link interface. The link interface of U400 is connected to DVI-I connector X400. The link
interface of U401 is connected to DVI connector X401.The SiI164 transmitter has a highly
flexible interface with either a 12-bit mode ( ½ pixel per clock edge ) or 24-bit mode 1-pixel /
clock input for true color ( 16.7 million ) support. In 24-bit mode, the SiI164 supports single or
dual edge clocking. In 12-bit mode, the SiI164 supports dual edge single clocking or single edge
dual clocking.
The SiI164 can be programmed though the I2C interface. The multi-function address inputs A1,
A2 and A3 of U400 are strapped to ground by resistors R409, R410 and R412 so the slave
address for readings is 0x71 and the slave address for writings is 0x70. The multi-function
address inputs of U401 A2 and A3 are strapped to ground by resistor R423 and R424 and A1 is
