manualshive.com logo in svg

Fujitsu M3099EH, Oem Manual

Share
Download
Fujitsu M3099EH Oem Manual Download Page 209

M3099EX/EH OEM Manual

B-7

SETUP MODE

<< SETUP MODE >>

BUZZER SET

BUZZER SET

ON

Screen 15

Screen 16

<< SETUP MODE >>

PREPICK SET

PREPICK SET

ON

B3.4  Setting buzzer

When you set the using of buzzer, you must set as follows.

17 At Screen 2, press [Mode 1] four times to go

to the BUZZER SET screen. (Screen 15)

18 Press [Mode 2] to see Screen 16. If “ON” is

displayed, the buzzer will ring when the error
is occured. If “OFF” is displayed, it wouldn’t.
The “ON” or “OFF” status flips each time
you press [Mode 1]. The status will be set in
EEPROM automatically.

19 If you want to return to Screen 15, press

[Mode 2]. When yo close the setup mode, go
to  9 .

B3.5  Setting pre-pick

When you set the using pre-pick, you must set as follows.

20 At Screen 2, press [Mode 1] five times to go

to the PREPICK SET screen. (Screen 17)

21 Press [Mode 2] to see Screen 18. If “ON” is

displayed, the pre-picking will be done when
the document is fed. If “OFF” is displayed, it
wouldn’t. The “ON” or “OFF” status flips
each time you press [Mode 1]. The status will
be set in EEPROM automatically.

22 If you want to return to Screen 17, press

[Mode 2]. When you close the setup mode,
go to  9 .

Screen 17

Screen 18

Summary of Contents for M3099EH





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands