manualshive.com logo in svg

Fujitsu M3099EH, Oem Manual, Page: 138 / 228

Share
Download
Fujitsu M3099EH Oem Manual Download Page 138

4-8

M3099EX/EH OEM Manual

Button specification and reading mode setting

The button specifications and setup details are explained each of the
simplex (front-side), duplex (front-side) and duplex (back-side)
reading modes.  The three modes are switched over with the Duplex
and Front/Back buttons as follows:

[Duplex] button

This button is used to select simplex or duplex document reading.
Pressing the button toggles the display between the initial screens of
the simplex and duplex reading modes.

<Initial screen of the simplex reading mode>

[Front/Back] button

This button is valid only in the duplex reading mode and to toggle
the read side front or back.

“F” and “B” alternately blink for the setting of front or back-side.

<Initial screen of the duplex reading mode>

0

1

2

3

4

5

6

7

8

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

S

F

A

4

4

0

0

L

>

m M M

.

0

1

2

3

4

5

6

7

8

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

D

F

A

4

4

0

0

L

>

m M M

.

Duplex button pressed

D

B

L

>

m M M

.

The setup and messages for the pressed buttons are displayed on the
bottom line for front-side reading and on the top line for back-side
reading.

Summary of Contents for M3099EH





































































































































































































































Reviews:

No comments