manualshive.com logo in svg

Fujitsu M3099EH, Oem Manual

Share
Download
Fujitsu M3099EH Oem Manual Download Page 207

M3099EX/EH OEM Manual

B-5

SETUP MODE

<Classification of user’s paper>

User’s paper are classified in line-art scanning as follows:
The horizontal axis shows the background density/color of paper.
The vertical axis shows the density of character/line.

1 – 5 are the pattern number set
in setup mode.

1 : Normal background and

character.

2 : Normal background and

light character.

3 : Dark background and

normal-density character.

4 : Light character on red paper.
5 : Light character on green

paper.

<Notice>

(1) For patterns “1” to “5” when the power is turned on

Check that IPC-2 for front/back sides are installed during initialization.
If IPC-2 for either the front or back side is not installed, the scanner
regards as no setting obligatory and changes the memory of EEPROM.

(2) When IPC-2 pre-set is executed in setup mode

Check that IPC-2 for front/back sides are installed when the scanner
enters in IPC-2 pre-set.
If IPC-2 for either the front or back side is not installed, the scanner
does not enter in IPC-2 pre-set.

(3) When IPC-2 pre-set mode is executed

When IPC-2 pre-set mode is executed in online mode, the reading
parameter is valid or invalid (Host setting is invalid) as follows:

Background density Background color

Normal

    Dark Red

Green Blue

Normal

1

3

Character
density

Light

2

4

5

Summary of Contents for M3099EH





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands