Fujitsu M2488, Product Manual

Page: 322 / 528

MAINTENANCE AND SERVICING M2488 PRODUCT GUIDE
8-12 CG00000-011503 REV. A April 1997
29 0-7 This is the command code of the command being processed when the error was detected.
30
0-7 Drive status at the time the error was detected.
31 0-7 The Drive Model Number is 03h.
32 0-7 The DRV ERR CMD Code 1 indicates the command being executed by the MTU when
the first error was detected.
33 0-7 The DRV ERR Code 1 is the error code of the first MTU error encountered.
34 0-7 Write error hardware register 1
35 0-7 Write error hardware register 2
36 0-7 Sequence status set when an error has occurred.
37 0-7 Servo status code is set when an error has occurred.
38 0-7 Command code is set when command has occurred.
Table 8-11. MTC to MTU Commands
COMMAND CODE
STOP 00
CLEAR ERROR 01
DOOR SOLENOID 02
SERVO DIAGNOSTIC 03
LOAD CARTRIDGE 04
REWIND 05
REWIND AND UNLOAD 06
SEARCH SECTOR 07
MOVE FORWARD READ 08
MOVE BACKWARD READ 09
MOVE FOR WRITE 0C
DATA SECURITY ERASE 0E
MOVE MAGAZINE 0F
WRITE ALL ZERO 10
SHUFFLE 11
MICROCODE DOWNLOAD D0
MICROCODE START DF
Table 8-10. Format 01h Sense Information, Drive Field Description (Continued)
BYTE BIT VALUE DESCRIPTION