Fujitsu LifeBook P-2046 Bios Manual Download | Manualshive

Page: 6 / 31

background image

6

L i f e B o o k P S e r i e s B I O S

Sectors:

• A number

between 0

and 63

–—

This item appears only when the type is identifed as Auto or Hard
Disk. When Hard Disk is selected, you can change the value. This
field is changed by incrementing (pressing the [Spacebar]) or by
typing in the number.

Maximum
Capacity:

• Display only

–—

Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Hard Disk is selected.

Multi-Sector
Transfers:

• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors
• 32 Sectors
• 64 Sectors
• 128 Sectors

[16 Sectors]

This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.

LBA Mode
Control:

• Disabled
• Enabled

[Enabled]

Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when
Auto is selected.

PIO Transfer
Mode:

• Standard
• Fast PIO 1
• Fast PIO 2
• Fast PIO 3
• Fast PIO 4

[Fast PI0 4]

Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected. Multi-word DMA is automati-
cally set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to
mode 2 for Fast PIO 4 / DMA.

DMA Transfer
Mode:

• Disabled
• Multiword

DMA 1

• Multiword

DMA 2

• Ultra DMA 0
• Ultra DMA 1
• Ultra DMA 2
• Ultra DMA 3
• Ultra DMA 4

[Ultra DMA 4]

Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected.

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Default

Description

PaulingWLAN BIOS.fm Page 6 Wednesday, February 6, 2002 3:46 PM

«
...
4
5
6
7
8
...
»

Summary of Contents for LifeBook P-2046
































Reviews:

No comments

Related manuals for LifeBook P-2046

The Toughbook 31

Brand: Panasonic Pages: 2

The Toughbook 31

Brand: Panasonic Pages: 40

Brand: Schenker Pages: 312

Brand: XMG Pages: 38

Brand: Lenovo Pages: 86

- G550 2958 NoteBook PC

Brand: Lenovo Pages: 128

Brand: Clevo Pages: 130

Brand: Clevo Pages: 110

Brand: Clevo Pages: 134

EasyNote MH Series

Brand: Packard Bell Pages: 24

N400c - Evo Notebook - PIII 700 MHz

Brand: Compaq Pages: 34

Brand: Packard Bell Pages: 27

Brand: Gigabyte Pages: 32

Brand: Gigabyte Pages: 15

Brand: IBM Pages: 4

Brand: IBM Pages: 132

600E - ThinkPad 2645 - PII 400 MHz

Brand: IBM Pages: 191

2714 - ThinkPad R500 - Core 2 Duo T6670

Brand: IBM Pages: 226

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands