manualshive.com logo in svg

Fujitsu Lifebook i-4190, User Manual

Share
Download
Fujitsu Lifebook i-4190 User Manual Download Page 59

48

1.

See your PC Card manual for specific instructions on the installation of your card. Some PC
Cards may require your LifeBook to be Off while installing them.

2.

Make sure there is no PC Card currently in the slot. If there is, see Removing PC Cards.

3.

If either of the eject buttons is extended, press it in until it clicks.

4.

Insert your PC Card into the slot with the product label facing up.

5.

Push the card firmly into the slot until it is seated in the connector.

Removing PC Cards

To remove a PC Card(s), follow these easy steps:
1.

See your PC Card manual for specific instructions on removing your card. Some PC Cards may
require your LifeBook to be in Suspend Mode or Off while removing them.

2.

Unlock the PC Card from the slot by first pressing the eject button associated with the slot in
which the card is located. When pressed, the button will pop out.

3.

Firmly press the button again until it is flush with the LifeBook. This will eject the card slightly out
of the slot allowing you to remove the card.

 CAUTION

Windows has a shutdown procedure for PC Cards that must be followed before removing a
card. (Please review your operating system manual for the correct procedure)

Critical Point

If the dialog box states that the device cannot be removed, you must save all of your open
files, close any open applications and shut down your LifeBook. Once your LifeBook has been
shutdown, you must turn Off the power using the power switch.

 CAUTION

If the PC Card(s) has an external connector and cable, do not pull the cable when removing
the card.

I Series_46-54

02/02/2001, 11:03

48

Summary of Contents for Lifebook i-4190







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands