Fujitsu lifebook e736 Operating Manual Download

Page: 102 / 110

Appendix

Installing the Software after the Recovery Image is Restored

Note: The following steps are needed only if you restore the image from the
DVD Recovery Disc Set that you purchased.

Installation of essential access software

1. Insert the Bootable Disc in your DVD drive.
2. Open the

Drivers

folder in the disc, and follow the steps in

readme.txt

. If there is not a

Drivers

folder in the Bootable Disc, the computer does not need the essential access software.
The recovery image already has the essential access software installed.

3. You can now connect to the internet and download FSDM (Fujitsu Software Download

Manager) from the support site and download all the software applicable to the
model and OS using FSDM if they are not downloaded yet.

Auto Installation support for the software downloaded from support website

1. Download FSDM (Fujitsu Software Download Manager) from the sup- port site and download all

the drivers applicable to the model and OS using FSDM if they are not downloaded yet.

2. When the software packages are downloaded from the web, it is important to

download the Auto Installer Software package and the model/language-speci

Readme

le if you prefer to auto install the software.

3. It is important to have the extracted Auto Installer software package folder

and

Readme

le in the same location as other software folders. Otherwise

autoinstallation of the software will not be supported.

4. Inside the Auto Installer software package, launch

FjAutoinstall.exe

as administrator.

5. Click

Yes

on the

User Account Control

dialog box. This will take some time to

process the software packages. A message will be displayed during this time
stating

Please wait while the content is being processed.

6. If the EULA is displayed for the Fujitsu Software Auto Installer, accept

the EULA, otherwise continue.

7. The Fujitsu Software Auto Installer user interface will be launched providing the ability

to auto install the software downloaded from support site.

8. It is recommended that you install all the software in the listed order. You can

Select All

, to install the software in the order listed.

9. Click the

Install

button to start the installation.

10. After installing all the selected drivers, the

Installation Results

window is displayed. Click

11. The

You must restart the system for the settings to take effect. Do you wish to

reboot now?

message appears. Select

Yes

12. The system will now reboot.

Windows 10 Procedures

It is very important that you create your Recovery Drive before beginning to use your system.

It is also important that you create a backup of the content of the

C:\Drivers

on your

system to writable media or an external drive. System-Speci

c Software Drivers are

also available for download through the Fujitsu support site.

102

Fujitsu

Summary of Contents for lifebook e736















































































































Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands

Fujitsu lifebook e736, Operating Manual

Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands