Fujitsu LIFEBOOK E544 Operating Manual Download

Page: 76 / 108

Troubleshooting and tips

The notebook does not start after switching it on

Notebook

Cause

Troubleshooting

The battery is not installed correctly.

►

Check whether the battery is installed
correctly in its compartment.

►

Switch the notebook on.

The battery is dead.

►

Charge the battery.

►

Insert a charged battery.

►

Connect the AC adapter to the notebook.

The AC adapter is not connected properly.

►

Check whether the AC adapter is properly
connected to the notebook.

►

Switch the notebook on.

The notebook stops working

Notebook

Ending

Cause

Troubleshooting

The notebook is in energy saving mode.

►

End energy saving mode.

An application program has caused the
malfunction.

►

Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).

The battery is dead.

►

Charge the battery.

►

Insert a charged battery.

►

Connect the AC adapter to the notebook.

The printer does not print

Printerdoesnotprint

Cause

Troubleshooting

The printer is not switched on.

►

Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).

The printer is not connected correctly.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.

►

Check whether the correct printer driver is
loaded (refer to the printer documentation).

Fujitsu

Summary of Contents for LIFEBOOK E544













































































































Search results

Summary of Contents for LIFEBOOK E544

Reviews:

Related manuals for LIFEBOOK E544

Brands by name

Popular brands

Fujitsu LIFEBOOK E544, Operating Manual

Search results

Summary of Contents for LIFEBOOK E544

Reviews:

Related manuals for LIFEBOOK E544

Brands by name

Popular brands