Fujitsu LifeBook A6010, User Manual

Page: 115 / 128

105
U s i n g t h e F i n g e r p r i n t S e n s o r
In Windows XP, your login options must be set either for
classic login, or for fast user switching and logon screen
to be enabled to use your fingerprint to log on to
Windows. To change this go to
Control Panel , select
User Accounts and then click Change the way users log
on or off . If your Windows screensaver is password
protected, the fingerprint capture window will now
appear next to screensaver password dialog during
resume. You can authenticate to your screensaver pass-
word prompt with your enrolled finger.
Password Management
OmniPass provides an interface that lets you manage
your passwords. To access it, double-click the OmniPass
key in the notification area. Click
Vault Management ;
you will be prompted to authenticate. Once you gain
access to
Vault Management , click Manage Passwords
under Vault Settings . You will see the Manage Passwords
interface, with a list of friendly names.
You can view the credentials stored for any remembered
website by highlighting the desired resource under
Pass-
word Protected Dialog and clicking Unmask Values .
Should a password be reset, or an account expire, you
can remove stored credentials from OmniPass. Highlight
the desired resource under
Password Protected Dialog
and click Delete Page . You will be prompted to confirm
the password deletion.
The two check boxes in Manage Passwords govern
whether OmniPass prompts you to authenticate or
directly logs you into the remembered site.
OmniPass will overwrite an old set of credentials for a
website if you attempt to use
Remember Password on an
already remembered site.
The exception to the above rule is the resetting of your
Windows password. If your password is reset in
Windows, then the next time you login to Windows,
OmniPass will detect the password change and prompt
you to “Update” or “Reconfirm” your password with
OmniPass. Enter your new Windows password in the
prompt(s) and click
OK and your OmniPass "master
password" will still be your Windows password.
OmniPass User Identities
Identities allow OmniPass users to have multiple
accounts to the same site (e.g.,
bob@biblomail.com and
boballen@biblomail.com ). If OmniPass did not provide
you identities, you would be limited to remembering
one account per site.
To create and manage identities, double-click the
OmniPass key in the notification area. Click
Vault
Management ; OmniPass will prompt you to authenti-
cate. Once you gain access to Vault Management , click
Manage Identities under Vault Settings . You can only
manage the identities of the currently logged in
OmniPass user
To add a new identity, click New Identity or double-click
Click here to add a new identity . Name the new identity
and click [OK], then click [Apply]. You can now switch
to the new identity and start remembering passwords.
To delete an identity, highlight the identity you want to
delete and click [Delete Identity], then click [Apply]
.
To set the default identity, highlight the identity you
want as default and click [Set as Default]; click [Apply]
to ensure the settings are saved. If you log in to
OmniPass with a fingerprint device, you will automati-
cally be logged in to the default identity for that
OmniPass user. You can choose the identity with which
you are logging in if you login using "master password".
Choosing User Identity during Login
To choose your identity during login, type your user-
name in the
User Name: field. Press [Tab] and see that
the Domain: field self-populates. Click the Password:
field to bring the cursor to it, and you will see the pull-
down menu in the
Identity: field. Select the identity you
wish to login as and then click OK to login.
Switch User Identity
To switch identities at any time, right-click the
OmniPass notification area icon and click
Switch User
Identity from the submenu. The Switch Identity dialog
will appear. Select the desired identity then click OK .
Identities and Password Management
On the Manage Passwords interface of the Vault
Management tab of the OmniPass Control Center, there
is a pull-down selection box labeled, Identity . This field
lets you choose which identity you are managing pass-
words for. When you select an identity here, only those
password protected dialogs that are associated with that
identity are shown. You can perform all the functions
explained in “Password Management” on page 105.
CONFIGURING OMNIPASS
This section gives an overview of both the Export/
Import function and the OmniPass Control Center.
Exporting and Importing Users
Using the OmniPass Control Center, you can export and
import users in and out of OmniPass. The export
process backs up all remembered sites, credentials, and
any enrolled fingerprints for an OmniPass user. All
OmniPass data for a user is backed up to a single
encrypted database file. During the import process, the
Windows login of the exported user is required. If the
proper credentials cannot be supplied, the user profile
will not be imported
.
When you delete an identity, all of its
associated remembered sites and password
protected dialogs are lost.
fennec.book Page 105 Thursday, September 7, 2006 11:42 AM