Fujitsu K50Y Manual Download Page 55 | Manualshive

Page: 55 / 61

Fujitsu K50Y Manual Download Page 55

54

4

Please refer to “Attaching the connector cover” and remove the
connector cover from the right side of the PC.

5

Install the drivers.

There are some USB devices that do not require drivers and may work by just connecting them to
the PC. Please refer to the USB device manual for details.

If they don’t operate normally

Remove the USB device if it does not operate properly once you have turned the power
on to the PC. Then, try connecting it again once you have turn the PC power off.

Removing a USB device

The operation may be different depending on the condition of the PC.

●

Please follow Step 1 if the power is on.

●

Please follow Step 3 if the power is off.

If the power is turned on

1

Click on

(Safely Remove Hardware) in the taskbar notification area

in the lower right of the screen.

2

Click on “Safely remove [the USB device you are using]”.

The message “Safe to remove hardware” will be displayed.

3

Remove the cable from the USB device from the USB connector.

Please refer to the USB device manual for the steps to be followed when removing a powered USB
device.

B5FJ.book Page 54 Wednesday, January 2, 2008 12:56 PM

«
...
53
54
55
56
57
...
»

Summary of Contents for K50Y






























































Reviews:

No comments