Fujitsu K50Y Manual Download Page 39 | Manualshive

Page: 39 / 61

Fujitsu K50Y Manual Download Page 39

38

This section gives details on what you should know about using peripherals such as memory etc.

Caution

Peripherals?

These are memory, printers, digital cameras or other device. These can be installed in the PC or be

connected to the PC using one of the various connectors.

It will be necessary to remove the connector cover if the peripherals are to be installed inside the PC or

connected to the right side. Please see “Removing and attaching the connector cover” for the method of

removing and attaching the connector cover.

Attaching peripherals

You can do more with your computer, such as increasing the processing power by adding memory or

printing by connecting a printer.

Also, you can read the photos you have taken with a digital camera into the PC or send them by e-mail.

1

Installing/setting up/adding peripherals

Using peripherals

●

Please turn off the PC and the devices that are connected to it and unplug the power cord from

the outlet before attaching or removing any peripherals.

Failure to follow this procedure may result in electric shock, fire or injury.

●

Please read this manual and properly connect the peripheral cable.

Electric shock or fire may result if it is used with the cables connected improperly. Also, this may

result in a breakdown of the PC or the peripheral.

B5FJ.book Page 38 Wednesday, January 2, 2008 12:56 PM

«
...
37
38
39
40
41
...
»

Summary of Contents for K50Y






























































Reviews:

No comments