Fujitsu IP-900 II D, Hardware User'S Manual, Page: 43 / 104

Chapter 2 Installation and Connection
IP-900E/IP-900D series
29
2.4
Connection to Network
To connect IP-900E/IP-900D series to a LAN device, connect the LAN device to the LAN
communication port of IP-900E/IP-900D series using a LAN cable (UTP cable). The LAN
communication port specification of IP-900E/IP-900D series is 10BASE-T/100BASE-TX.
The figure below shows the connection method.
For details about connectors and cables, see Section 4.2, “Cable and Connector Details.”
For electrical specifications, see Appendix 2.3, “Function Specifications.”
Figure Connection to a network
Please do not provision the IP address below.
・
IP address commonly unused
（
0.0.0.0
，
255.255.255.255
，
etc…
）
・
Loop back address (127.xxx.xxx.xxx)
・
Class D and Class E addresses
・
IP address already used
For more information, see IP-900E/IP-900D series Software User’s Guide.
2.4
CAUTION
NOTE:
RDY
PWR ALM
IN
DWN
OPT
MNT
FG
/ACT
100M
LINK
L R
100-240V
Hub, Router, PC, etc.