Fujitsu IP-900 II D, Hardware User'S Manual, Page: 39 / 104

Chapter 2 Installation and Connection
IP-900E/IP-900D series
25
or
or
or
or
or
or
USABLE DETACHABLE POWER SUPPLY CORD SET
MODEL Input Connector Cord Attachment Plug cap
North
America
<*1>
<*2>
100-
120V
IEC C-13
Rated 13A, 125V
UL, CSA Approved
Type SJT, No.16 AWG Min.
3-Conductors
(Single phase;2-current carrying
conductors & ground)
UL, CSA Approved
NEMA (5-15P)
parallel blade
Rated 13A, 125V
UL, CSA Approved
200-
240V
IEC C-13
Rated 15A, 250V
UL, CSA Approved
Type SJT, No.14 AWG Min.
3-Conductors
(Single phase; 2-current carrying
conductors & ground)
UL, CSA Approved
NEMA (6-15P)
tandem blade
Rated 15 A, 250 V
UL, CSA Approved
Europe
<*2>
100-
240V
IEC C-13
Rated 10A, 250V
<*1>
CENELEC OC
3X1.0 square mm<*1>
<HAR>
Rated 10 A, 250 V
<*1>
Aus-
tralia
100-
240V
IEC C-13
Rated 10A,
250V
Cable: AS OD 3 X1.0 square mm
e.g.
Rated 10 A, 250 V
U.K
<*2>
100-
240V
IEC C-13
Rated 10A,
250V
BS OC 3 X1.00 square mm Rated 10 A. 250 V
IEC C-13
Rated 13A,
125V
Type HVCTF cross section area
1.25 square mm
3-Conductors
(Single phase;2-current
carrying conductors & ground)
NEMA (5-15P)
parallel blade
Rated 13 A, 125 V
Japan 100V
METI Approved
or <PSE>
METI Approved
or <PSE>
METI Approved
or <PSE>
220V
(Class I)
IEC 60320-1
(IEC C-13)
Rated 12A, 250V
Comply with KSC3304.
Type VCTF cross section area 1.25
(0.50 or 1.00 or 2.00) square mm
3-Conductors
(Single phase;2-current
carrying conductors & ground)
Comply with KSC8305.
Rated 12A, 250V
Korea
220V
(Class II)
IEC 60320-1
(IEC C-13)
Rated 3A, 250V
Comply with KSC3304.
Type VCTFK cross section area
1.25 (0.50 or 0.75 or 1.00 or 2.00)
square mm
2-Conductors
Comply with KSC8305.
Rated 12A, 250V
Note: *l. Be sure that the detachable proper Supply cord has the approval of the
appropriate safety agencies of the country where the equipment will be used.
*2. Cable length of above Power Supply cord shall be shorter than 4.5 m.
or
ASA
P S
E
P S
E
P S
E