En-2
OPERATING MANUAL
1
Intake grille
Before starting operation, make sure that the intake grille has been
shut completely. Incomplete closing may have an effect on the proper
function or performance of the product.
2
MANUAL AUTO button
Use when the remote controller is lost or there is a malfunction.
Status
Action
Mode or operation
In operation
Press more than 3 seconds.
Stop
Stopping
Press more than 3 seconds and
less than 10 seconds.
AUTO
Press more than 10 seconds.
(Only for servicing.*)
Forced cooling
After cleaning
Press less than 3 seconds.
Filter indicator reset
*:To stop forced cooling, press this button or Start/Stop button on the
remote controller.
3
Wireless LAN control indicator and buttons
WLAN adapter is build-in for wireless LAN control.
For details, refer to the setting manual of the Wireless LAN control.
4
Front panel
5
Human Sensor
See page 8
Used for Energy Saving Program. Controls temperature setting by
detecting people in the room.
6
Vertical air
À
ow direction louver
Each time you press Vertical SET button on the remote controller, the
angle of the vertical air
À
ow direction louver moves as follows:
1
2
3
4
5
6 7 8
COOL or DRY mode
HEAT mode
1
2
3
7
6
5
*
4
8
*
*: Default setting in each mode.
• Do not adjust by hand.
• At the beginning of AUTO or HEAT mode, they may stay on position
1 for a while for adjustment.
• If the angle is set to position 5-8 for more than 30 minutes in COOL
or DRY mode, the louver will automatically return to position 4.
• Keeping the position 5-8 during COOL or DRY mode may cause
condensation to form, and the drops may damage your property.
7
Power diffuser
In conjunction with movement of the vertical air
À
ow direction louver,
the angle of the power diffuser moves as follows:
Vertical air
À
ow
direction louver
Power diffuser
3
7
6
5
4
2
1
8
8
Horizontal air
À
ow direction louver
Each time you press the Horizontal SET button on the remote
controller, the air
À
ow direction range of the horizontal air
À
ow direction
louver will change as follows:
1
2
3
4
5
Horizontal air
À
ow direction louver
5
4
1
3
*
2
*: Default setting.
9
Drain hose
1
15
14
9
4
3
5
2
8
6
7
11
10
12
13
0
Remote controller signal receiver
CAUTION
For appropriate signal transmission between remote controller and
indoor unit, keep the signal receiver away from the following items:
- Direct sunlight or other strong lights
- Flat-panel television screen
In rooms with instantaneous
À
uorescent lights, such as inverter type
ones, the signal may not be transmitted properly. In such a case,
consult the store of purchase.
A
ECONOMY indicator (green)
Lights in ECONOMY operation and in MIN. HEAT operation.
B
TIMER indicator (orange)
Lights in TIMER operation, and blinks slowly when the timer setting
error is detected.
For details, refer to “Auto-restart function” on page 8.
C
OPERATION indicator (green)
Lights in normal operation, and blinks slowly in Automatic defrosting
operation.
See page 10
D
Air
¿
lter
See page 10
E
Air cleaning
¿
lters
Purify or deodorize the air, and provide fresh air
À
ow.
Indoor unit accessories
Remote
controller
Batteries
Air cleaning
¿
lters
Filter holders
Remote controller
holder
Tapping screws
(M3 × 12 mm)
Indoor Unit Overview and Operations
9320455033-02_OM.indb 2
8/31/2016 4:13:32 PM
