2
Setting SCSI ID
SCSI-ID
Pin number 4
Pin number 3
Pin number 2
Pin number 1
#0
Open
Open
Open
Open
#1
Short
Open
Open
Open
#2
Open
Short
Open
Open
#3
Short
Short
Open
Open
#4
Open
Open
Short
Open
#5
Short
Open
Short
Open
#6
Open
Short
Short
Open
#7
Short
Short
Short
Open
#8
Open
Open
Open
Short
#9
Short
Open
Open
Short
#10
Open
Short
Open
Short
#11
Short
Short
Open
Short
#12
Open
Open
Short
Short
#13
Short
Open
Short
Short
#14
Open
Short
Short
Short
#15
Short
Short
Short
Short
(*1) SCSI-ID setting is #15 at shipment.
Setting Motor Start Mode
Pin number 5
Setting at shipment
Open
Point
●
Setting of the motor start mode for this product must be “open”.
●
In the “SCSI Select Utility” of the teamserver, ensure the setting of “Send Start Unit
Command” corresponding to this product is “yes”. If it is set to “no”, the teamserver may
not start properly but may display a message of “Device connected, but not ready”.
