Fujitsu GPS User Manual Download Page 66

Page: 66 / 206

Basic operation

4. Map retrieval methods

Touch the letters to enter the street
name.

●

Up to 24 letters can be entered.

●

Touch

to delete letters entered by

mistake.

●

Lettered touch switches with no
corresponding search results will
appear inverted. Input is not enabled
for these switches.

Touch

●

A list of search results for the entered
street name is displayed.

Touch the corresponding street
name.

●

A map centered on the corresponding
street is displayed.

●

The corresponding house number can
be entered if it has already been
registered.

Touch the numbers to enter the
house number.

●

Enter a number within the range
provided.

●

Touch

to delete numbers entered

by mistake.

●

Numbered touch switches with no
corresponding search results will
appear inverted. Input is not enabled
for these switches.

List

If the number of stored names corresponding to the letters you have entered
reaches 4 or less, a screen automatically appears displaying the search results.

Summary of Contents for GPS















































































































































































































Search results

Summary of Contents for GPS

Reviews:

Brands by name

Popular brands

Fujitsu GPS, User Manual

Search results

Summary of Contents for GPS

Reviews:

Brands by name

Popular brands