SERVIS IP-Serial
1p Converter
User's Guide
65
4
Command D
e
scriptions
4.1.12 useradd
Command
Overview
Registers a user with the specified user name.
Syntax
useradd
<username>
Parameter(s)
username = The user name to be registered.
Password required?
No
Notes
(1) Up to four users can be added. If more than four users are specified, an
error occurs when registering.
(2) The user name has a limit of 63 characters.
(3) Pressing the Enter key without entering anything when setting the
password during a user registration will register the user without a
password. Afterwards, the passwd command can be used to set a
password.
Example (from the local console)
Registers a general user called "tester1".
If more than four users are specified, the following is displayed during
registration and the users are not registered.
$
useradd tester1
Enter
administrator password:
Enter
Changing local password for tester1.
New password:
Enter
Retype new password:
Enter
useradd completed.
$
$
useradd tester5
Enter
can not add user. entry over.
$
Summary of Contents for FX-3001SR
Page 22: ...SERVIS IP Serial 1p Converter User s Guide 12 1 Setup MEMO ...
Page 60: ...SERVIS IP Serial 1p Converter User s Guide 50 3 Function Details MEMO ...
Page 104: ...SERVIS IP Serial 1p Converter User s Guide 94 Command Descriptions 4 MEMO ...
Page 164: ...SERVIS IP Serial 1p Converter User s Guide 154 6 Specifications MEMO ...
