SERVIS IP-Serial
1p Converter
User's Guide
26
2
Basic Operations
2.11. Product Logout and Exit
Overview
After configuring this product or operating a target device, use the logout command
to log out.
Refer to
4.1.3 logout Command (page 55)
When connecting from a remote terminal with telnet/ssh, logging out automatically
terminates the session.
When connecting from a local console, the following login prompt is displayed again
upon logging out.
To exit the product, turn off the power switch except when the product is writing to
the ROM or when a recovery is in progress.
Alternatively, execute the shutdown command and check to verify whether the
following is displayed, then turn off the power switch.
Refer to
4.1.1 shutdown Command (page 53)
Turning off the power while a setup command is running in the shell console may
result in unsaved settings. Confirm that the command has been executed and
control has been restored to the shell console before turning off the power switch.
$
shutdown
Enter
↵
administrator password:
Enter
↵
Shutdown NOW!
$ Wed May 17 18:40:52 GMT 2006
syncing disks... done
The operating system has halted.
Please press any key to reboot.
$
logout
Enter
↵
6:51PM on Wednesday, 17 May 2006
login:
Summary of Contents for FX-3001SR
Page 22: ...SERVIS IP Serial 1p Converter User s Guide 12 1 Setup MEMO ...
Page 60: ...SERVIS IP Serial 1p Converter User s Guide 50 3 Function Details MEMO ...
Page 104: ...SERVIS IP Serial 1p Converter User s Guide 94 Command Descriptions 4 MEMO ...
Page 164: ...SERVIS IP Serial 1p Converter User s Guide 154 6 Specifications MEMO ...