SERVIS IP-Serial
1p Converter
User's Guide
23
2
Basic Operations
2.9. Connecting from a Remote Terminal
Function overview
This product can be accessed by telnet or ssh encrypted communication from a
terminal on a network.
To configure the product from a terminal on a network, log in to the product using
telnet or ssh, and then execute commands from the shell console.
Use the following syntax to connect from a network terminal.
Syntax
telnet <host_name>
ssh
<host_name>
Parameter(s)
host_name = host name or IP address
Procedure
The following explanation uses a telnet connection to the product as an example.
The following shows the parameter set to the telnet client:
Protocol
Value
Emulation
VT100 compatible terminal
1. Power on the terminal PC on the network, and then execute the ping command
to determine whether communication can be established with this product.
Assume the IP address of "192.168.0.50" has been pre-assigned to this
product.
2. Execute the telnet connection from the emulator application.
3. Once a telnet session is established, the following "login:" prompt is displayed.
telnet 192.168.0.50
Enter
10:54PM on Friday, 12 August 2005
login::
C:\temp>
ping 192.168.0.50
Enter
Summary of Contents for FX-3001SR
Page 22: ...SERVIS IP Serial 1p Converter User s Guide 12 1 Setup MEMO ...
Page 60: ...SERVIS IP Serial 1p Converter User s Guide 50 3 Function Details MEMO ...
Page 104: ...SERVIS IP Serial 1p Converter User s Guide 94 Command Descriptions 4 MEMO ...
Page 164: ...SERVIS IP Serial 1p Converter User s Guide 154 6 Specifications MEMO ...
