101
- Restoring Your Pre-installed Software
Running Recovery and Utility from the disc
BOOT Priority Change
Before restoring an image, you must first verify that the system is set up to boot from the optical drive. To
verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk
drive), perform the following steps:
1
Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left
mouse or touchpad button; the TrustedCore Menu will appear.
2
Select the Boot Menu from the TrustedCore Menu.
3
Highlight the CD/DVD option, then click [OK].
4
Insert the Recovery and Utility Disc into the drive tray.
After you have changed the boot priority, you can restore a backup image when booting up.
Procedure for using Recovery and Utility disc
1
Turn on the power to your system.
2
Ensure that you have a device that can read CDs either installed in your system or attached externally to it, and
that it has been set up as the Boot device (in accordance with “BOOT Priority Change” on page 101).
3
Insert the Recovery and Utility disc into the drive tray. With the boot priority set in the procedure above, the
system will boot from the Recovery and Utility disc.
4
Reboot your system. After the system reboots, the Recovery and Utility screen appears. On the screen are
three tabs: Diagnostics, Recovery, and Utility.
•
T
HE
USE
OF
THIS
DISC
REQUIRES
THAT
YOU
HAVE
A
DEVICE
CAPABLE
OF
READING
CD
S
ATTACHED
TO
YOUR
SYSTEM
. Y
OU
WILL
NEED
TO
ATTACH
AN
EXTERNAL
PLAYER
. F
OR
MORE
INFORMATION
ON
AVAILABLE
EXTERNAL
DEVICES
,
VISIT
OUR
W
EB
SITE
AT
:
US
.
FUJITSU
.
COM
/
COMPUTERS
.
•
T
HIS
DISC
CAN
ONLY
BE
USED
WITH
THE
SYSTEM
WITH
WHICH
IT
WAS
PURCHASED
.
