Fujitsu FPCM11383 Easy Manual Download

Page: 38 / 120

Using your notebook

A26391-K220-Z227-1-7619, edition 1

Windows XP

You can configure the ON/OFF switch under

Start – (Settings) - Control Panel - Performance

and Maintenance - Power Options - Advanced

Windows Vista

You can configure the ON/OFF switch under

Start - (Settings) - Control Panel – Mobile PC -

Power Options

If you have assigned a password, you must enter this when requested to do so, in order to
start the operating system. Detailed information can be found in the chapter "Safety
notes".

Switching the notebook off

►

Close all programmes and shut down your operating system (please see operating system
manual).

►

Slide the ON/OFF switch (1) to the right.

The ON/OFF switch returns automatically to its original position.

►

Close the notebook (see "Closing the notebook").

Summary of Contents for FPCM11383

























































































































Search results

Summary of Contents for FPCM11383

Reviews:

Related manuals for FPCM11383

Brands by name

Popular brands

Fujitsu FPCM11383, Easy Manual

Search results

Summary of Contents for FPCM11383

Reviews:

Related manuals for FPCM11383

Brands by name

Popular brands