Fujitsu FI-800R, Operator'S Manual, Page: 76 / 205

ATTENTION
●
The image is output at the center of the page in the size specified for [Paper Size] in the scanner driver.
●
When [Automatic] is specified for [Paper Size] in the scanner driver, the most suitable size is selected from
standard sizes which can be specified for [Paper Size]. Note that the size of the image may become smaller
than the original document depending on the document scanned, or part of the image may appear missing.
Example
When a business card size image is printed in the center of an A6 size document
→ The image is output in business card size.
To output the scanned image in the actual size of the document, specify the document size for [Paper size].
HINT
In the following cases, place a blank (white) sheet of paper behind the document when scanning.
●
The scanned image is not output in the actual size of the document when [Automatic] is specified for [Paper
size] in the scanner driver.
● Shadows appear around the edges of the scanned image.
● Black lines appear around the edges of a uniquely shaped cutting.
● Image outside the document appears on the scanned image.
Various Ways to Scan
76