Fujitsu FI 6140 - Document Scanner Operator'S Manual Download Page 140

Page: 140 / 226

5.2 How to Check and Reset the Consumables Counters

Replace consumables when this message is displayed.

When you click the [Ignore] button, this message disappears and scanning continues.

You may be able to continue scanning for a while, however, it is recommended that you replace the consumable as soon

as possible.

To stop the scanning and replace the consumable right away, click the [Cancel] button.

For the replacement of consumables, refer to the following sections.

Pick roller:

5.4 Replacing the Pick Roller

Brake roller:

5.3 Replacing the Brake Roller

file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/05/c05_02_01.htm (4/4) [2008/10/30 12:43:18]

Summary of Contents for FI 6140 - Document Scanner



































































































































































































































Search results

Summary of Contents for FI 6140 - Document Scanner

Reviews:

Related manuals for FI 6140 - Document Scanner

Brands by name

Popular brands

Fujitsu FI 6140 - Document Scanner, Operator'S Manual

Search results

Summary of Contents for FI 6140 - Document Scanner

Reviews:

Related manuals for FI 6140 - Document Scanner

Brands by name

Popular brands