11
Attaching/removing battery pack
•
After turning the power OFF, fold the terminal and
hold it with your hand.
a
Holding the tab, pull out the tray until it clicks.
Tray
Tab
■
Attaching
b
Put UIM with the IC side upward on the tray in the
direction shown in the figure.
IC
Corner cut
UIM
c
Push the tray fully until it stops.
a
Holding the tab, pull out the tray until it clicks and
carefully remove UIM.
■
Removing
UIM slot
Tab
Press here with your thumb
Back Cover
■
Attaching
a
Remove the back cover by sliding it about 2 mm in
the direction of the arrow while pressing it with your
thumb.
QIR.book Page 11 Thursday, April 17, 2008 3:14 PM
