10.8 Notifications
Adding a Community
Add an SNMP community to include the ETERNUS CS800 in a group of devices that are
monitored by a common management station.
If no communities are defined, the SNMP agent is not accessible.
To add a community:
1. Click
Add
.
The
Add SNMP Community
page displays (see
"Add SNMP Community Page" on page
).
Figure 196: Add SNMP Community Page
2. In the
Name
box, enter a unique
Name
for the community (up to 20 characters).
Valid characters are letters, numbers, hyphens, and underscores.
3. Enter a valid
IP Address
and
Network Mask
pair.
A pair is valid if performing a logical bitwise
AND
operation on the IP address and the
network mask results in the IP address. See the table below for examples:
IP Address / Network Mask
Result
10.40.166.87
255.255.255.255
Allows access only from
10.40.166.87
10.40.166.87
10.40.166.87
Allows access only from
10.40.166.87
ETERNUS CS800
285
Summary of Contents for ETERNUS CS800 S6
Page 1: ...English ETERNUS CS800 S6 User Guide V3 2 7 Edition April 2017 ...
Page 131: ...7 3 The Remote Management Console Figure 98 Remote Management Pages Map ETERNUS CS800 131 ...
Page 173: ...8 8 AIS Connect Figure 132 AISConnect Wizard Confirm ETERNUS CS800 173 ...
Page 449: ...16 2 Storage Subsystem Figure 313 Inserting the 3 5 inch HDD module ETERNUS CS800 449 ...
