System expansions
Installing and removing an M.2 module
Installing an M.2 module
►
Remove the casing cover (see chapter
"Removing the casing cover", Page 36
).
►
Fold out the drive cage (see chapter
"Opening the drive cage", Page 47
).
a
bb
2
1
►
Insert the M.2 module (b) at a slight angle in the direction of the arrow
(1) into the slot (a) on the mainboard.
►
Secure the M.2 module on the mainboard with the screw (2).
►
Fold the drive cage into the closed position again (see chapter
"Closing the drive cage", Page 48
).
►
Fit the casing cover onto the casing again (see chapter
"Reattaching the casing cover.", Page 37
).
If necessary, you must adjust the entry for the M.2 module accordingly in the
BIOS Setup
.
60
Fujitsu
