Getting started
Setting up the device
Workstation
Ergonomic
Device
When installing your device, please read the recommendations and
safety notes in the "Safety" manual.
Only install the device in the operating positions for which it is intended.
We recommend that you place your device on a surface with good anti-slip qualities.
In view of the multitude of different
fi
nishes and varnishes used on furniture, it is
possible that the rubber feet will mark the surface they stand on.
Do not expose the device to extreme environmental conditions (see
data", Page 47
). Protect the device against dust, humidity and heat.
Make sure that the device is adequately ventilated.
In order to avoid overheating, do not cover the ventilation area of the monitor or the device.
Do not stack several devices on top of each other.
If you place a monitor on the device, it may weigh a maximum of 25 kg. Make
sure that you do not block any ventilation slots on the device.
Depending on the location of your device, bothersome vibrations and noises
may occur. To prevent this, a distance of at least 10 mm should be maintained
from other devices on casing sides without ventilation surfaces.
In addition, we recommend placing the device on support feet, as these buffer vibrations.
You can use the device in a vertical or horizontal operating position.
A26361-K1002-Z220-1-7619, edition 2
7
Summary of Contents for Esprimo C series
Page 1: ...ESPRIMO C Operating Manual ...
Page 3: ......
