Fujitsu EM7455D2 Operating Manual Download

Page: 65 / 119

Accessories for your Tablet PC (optional)

►

Reattach the cover part to the holder part using the Velcro® and the snap buttons.

►

If required, adjust the handstrap on the back and use steel D-rings for
the shoulder strap attachment.

The cover can be used in two different orientations as a stand for your Tablet:

Care tips for the folio cover

The folio cover is made of top-quality materials and is designed to withstand daily use.

•

Treat the folio cover as you would a briefcover or purse.

•

Occasionally, the folio cover may become soiled. To clean it, use a commercially available
cleaner and follow the instructions contained with the cleaner.

•

Never submerge the folio cover in water.

Fujitsu

Summary of Contents for EM7455D2
























































































































Search results

Summary of Contents for EM7455D2

Reviews:

Related manuals for EM7455D2

Brands by name

Popular brands

Fujitsu EM7455D2, Operating Manual

Search results

Summary of Contents for EM7455D2

Reviews:

Related manuals for EM7455D2

Brands by name

Popular brands