Accessories for your Tablet PC (optional)
1
1
1
1
►
Note that there may be round adhesive covers over the inserts; if they are present, remove them.
►
Position the folio cover on a stable,
fl
at and clean surface, with the inside
of the folio cover pointing down.
►
Disengage the Velcro and snap buttons.
►
Detach the cover part from the holder part.
►
Turn over the system and align the palm vein sensor (a) with the corresponding
indent on the right side (b) of the holder:
a
b
2
►
Carefully press the system into the holder (2).
Be sure that you do not over-tighten the screws. Overtightening the
screws could damage the unit.
►
Turn over the folio cover and attach the system to the folio cover using the four screws
(3) provided in the kit. Use Phillips screwdriver with bit #0:
62
Fujitsu
