manualshive.com logo in svg

Fujitsu DESKPOWER P321, User Manual

Share
Download
Fujitsu DESKPOWER P321 User Manual Download Page 39

23

The screen stays blank

If your screen remains blank this may be due to the following:

Monitor is switched off

Switch your monitor on.

Power saving has been activated (screen is blank)

Press any key on the keyboard.

or

Deactivate the screen saver. Enter the appropriate password.

Brightness control is set too dark

Adjust the brightness control. For detailed information, please refer to the operating manual

supplied with your monitor.

Power cable not connected

Switch off the monitor and the PC.

Check that the power cable of the monitor is properly connected to the monitor and, depending

on the connector, to the system unit or to the grounded mains outlet.

Check that the power cable of the PC is plugged properly into the system unit and grounded mains

outlet.

Switch on the monitor and the system unit.

Monitor cable not connected

Switch off the monitor and the system unit.

Check that the monitor cable is properly connected to the system unit and monitor.

Switch on the monitor and the system unit.

Welli2 (21-26)

15/12/04, 10:31 AM

23

Summary of Contents for DESKPOWER P321























































Reviews:

No comments

Brands by name

Popular brands

Load more brands