D2119 (RX300 S3)
Technical Manual
31
4
SAS and RAID
4.1
SAS/IME configuration program
The system board is equipped with an eight channel SAS controller 1068 from
LSI Logic.
You will find the exact location of the SAS connector in the schematic view of
the system board.
The BIOS of the onboard SAS controller includes a menu-driven SAS/IME
(Integrated Mirror Enhanced) configuration program. This program allows you
to change almost all of the option settings of the SAS controller.
When you boot the system a SAS-BIOS message listing the SAS devices
connected is displayed.
I
If a SAS-BIOS error message appears or problems arise with SAS
devices, please read the documentation of your SAS device.
If you are unable to trace or rectify the error, please contact your dealer
or our customer service centre.
Working with the keyboard
Use the following keys when running the program:
Calling the SAS/IME configuration program
Ê
Start the PC, if the following message appears, press the key combination
[CTRL] and [C]:
„Press Ctrl-C to start LSI Logic Configuration Utility“
arrow keys
to make selections
[+]
/
[-]
to change a selection
[ENTER]
to accept a selection
[ESC]
to call the previous menu and to terminate the SAS configu-
ration program
[F2]
to jump into the menu line. This function is not available in all
menus
