Fujitsu D1837 Technical Manual Download Page 37

Page: 37 / 48

BIOS Recovery - Recovering System BIOS

28 - English

A26361-D1837-Z120-1-7419, Edition 1

BIOS Recovery - Recovering System BIOS

All BIOS settings are reset to the default values.

►

Open the casing as described in the operating manual.

►

On the mainboard set the jumper to the appropriate setting to restore the system BIOS (see
chapter "Jumper settings").

►

Close the casing as described in the operating manual.

►

Insert a BIOS update floppy disk and start the PC.

►

Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you
hear the signal sequence "short-short- long- long- long" and the diskette access indicator is
dark. This can take a few minutes.

►

Open the casing as described in the operating manual.

►

Restore the switch or jumper settings.

►

Close the casing as described in the operating manual.

►

Remove the floppy disk from the drive.

►

Start the PC and invoke

BIOS Setup

►

Select the menu item

Reset Configuration

in the menu

Advanced

and change the setting to

Yes

►

Save the change and terminate

BIOS Setup

The BIOS recovery has now been completed. The system restarts.

Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
("Drivers & Utilities" CD).

Summary of Contents for D1837

















































Search results

Summary of Contents for D1837

Reviews:

Related manuals for D1837

Brands by name

Popular brands

Fujitsu D1837, Technical Manual

Search results

Summary of Contents for D1837

Reviews:

Related manuals for D1837

Brands by name

Popular brands