background image

Information on this document 

On April 1, 2009, Fujitsu became the sole owner of Fujitsu Siemens Compu-
ters. This new subsidiary of Fujitsu has been renamed Fujitsu Technology So-
lutions. 

This document from the document archive refers to a product version which 
was released a considerable time ago or which is no longer marketed. 

Please note that all company references and copyrights in this document have 
been legally transferred to Fujitsu Technology Solutions.  

Contact and support addresses will now be offered by Fujitsu Technology So-
lutions and have the format 

…@ts.fujitsu.com

The Internet pages of Fujitsu Technology Solutions are available at 

http://ts.fujitsu.com/

... 

and  the user documentation at 

http://manuals.ts.fujitsu.com

.

Copyright Fujitsu Technology Solutions, 2009

Hinweise zum vorliegenden Dokument 

Zum 1. April 2009 ist Fujitsu Siemens Computers in den alleinigen Besitz von 
Fujitsu übergegangen. Diese neue Tochtergesellschaft von Fujitsu trägt seit-
dem den Namen Fujitsu Technology Solutions. 

Das vorliegende Dokument aus dem Dokumentenarchiv bezieht sich auf eine 
bereits vor längerer Zeit freigegebene oder nicht mehr im Vertrieb befindliche 
Produktversion. 

Bitte beachten Sie, dass alle Firmenbezüge und Copyrights im vorliegenden 
Dokument rechtlich auf  Fujitsu Technology Solutions übergegangen sind.  

Kontakt- und Supportadressen werden nun von Fujitsu Technology Solutions 
angeboten und haben die Form 

…@ts.fujitsu.com

Die Internetseiten von Fujitsu Technology Solutions finden Sie unter 

http://de.ts.fujitsu.com/

..., und  unter 

http://manuals.ts.fujitsu.com

 finden Sie die 

Benutzerdokumentation.

Copyright Fujitsu Technology Solutions, 2009

Summary of Contents for D1271
















































































Reviews: