Fujitsu Control 3-0801, User Manual

Page: 36 / 374

4. Web Interface Operations
4.4 Managing Device Properties
Viewing and changing appliance configuration information
The s3-0801/1601 switch can report most device properties directly through the
switch web browser.
The Configure tab allows you to display a list of categories covering a wide range
of parameters for your switch. When a category is selected from the list, the
parameters associated with the category will be read from the unit. You will then
be able to modify those parameters and send the changes securely back to the
switch.
Viewing switch parameters
The Appliance category allows you to view the Product Type, Product Name,
Product Description, EID, MAC Address, Number of Digitizers, ARI Ports and
Local Ports for the switch.
Users can view all appliance information, but only Administrators can change settings.
The Sessions sub-category allows you to apply controls to your video sessions.
Session time-out
By enabling the Video Session Timeout option, you allow the switch to close an
inactive video session after a specified number of minutes. The Video Session
Preemption Timeout option allows you to specify the time (5 - 120 seconds) for
which a preemption warning message appears before a video session is
preempted. If this option is not enabled, preemption occurs without warning.
To enable, disable or configure the session time-out:
1. Select the Configure tab, then select Appliance - Sessions .
2. Select the desired setting for the Session Timeout box.
3. If necessary, select the time limit for Inactivity Timeout.
It is possible for two users to select the same server at the same time. Each may enter
information at the same time, so care must be taken to avoid errors.
The Encryption option allows you to specify the type of encryption to be used for
video, keyboard and mouse sessions. You can select multiple methods when a
new client connection is requested. The switch negotiates for the highest enabled
encryption method.
590-1035-640A
30