6
7
4
3
2
1
5
9
10
8
11
①
Lens
Mount
A suitable type CS mount lens may be attached. C mount lenses can be attached using a
C/CS mount adapter.
②
Back Focus Lock Screw
A ALLEN WRENCH can be inserted here to stabilize the lens mount using a screw to
adjust the distance between the lens mounting surface and the imaging surface. Refer to
“
Lens: Back Focal Length Adjustment
” for adjustment.
③
Camera
Mounts
The camera can be mounted using either the top or bottom of the main body. Use 1/4 - 20
screw for mounting.
④
Video Output Connector
This is an output terminal for the video signal. (BNC type)
⑤
Lens
Connector
4 Pin connector for an auto iris lens. Refer to “
Lens: Electronic Connections
” for wiring.
⑥
RS485 Terminal Switch
Use this when connecting an external device using the external control terminal of this
device. ON: Terminal with 100
Ω
. OFF: No terminal
⑦
Power
Indicator
This lights up when powered on.
⑧
Setup
Switch
This is a switch for the function settings. This is used when a menu is displayed and
settings are determined.
For details, refer to “
SETUP MENU: Settings Operation
”.
⑨
Power
Input
Terminal
This is the input terminal where power is supplied. This uses both 12 V DC and 24 V AC.
⑩
External Control Terminal
This can be used to connect an RS-485 I/O compatible terminal. It can also be used for an
external control terminal for the DAY & NIGHT function. For details, refer to "
External
Control Input Terminal
".
⑪
Iris Type Selector Switch
This switch is used to select the type of auto iris lens drive signal.
DC voltage drive: upward side. VIDEO signal control: downward side
.
EXTERNAL CONTROLS AND CONNECTORS
En-6
Figure 1
Top Front View
Rear View
