Fujitsu CG-641 Series, Operation Manual

Page: 23 / 27

(8) Initialize (INITIALIZE)
This returns all settings to the initial factory settings.
Figure 14 INITIALIZE menu
Operating procedure
1. Move the cursor to “INITIALIZE” and press the switch to display the “INITIALIZE” screen.
2. Move the cursor to “OK” and press the switch to run initialization.
3. This automatically returns to the “MAIN MENU” when initialization is complete.
Note) The following settings won't be reset with this initialization.
z Setting value of “ADDRESS” and “COM SPEED" from the "CAMERA SETUP" menu
z “PHASE” phase adjustment value of “SYNC SELECT” from “FUNCTION SET.” menu
z BLEMISH COMPENSATION value after running the “BLEMISH COMPENSATION”
Setting details are shown when initialize is running.
Figure 15 Setting details for INITIALIZE
En-22
INITIALIZE
ALL SETTINGS ARE
IINITIALIZED
OK CANCEL
CAMERA SETUP
ADDRESS
→ 1
COM SPEED → 4800
L. SETUP JUMP → ON
RETURN END
CHROMA
RY GAIN
→ 1
BY GAIN → 1
RY HUE → 0
BY HUE → -2
RETURN END
FUNCTION SET.
SYNC SELECT
WHITE BALANCE
CHROMA
GAMMA
APERTURE
CABLE COMPEN.
MASKING
TITLE
RETURN END
→ (AUTO)
→ AUTO
→
→ CRT/PDP
→ -1
→ SHORT
→ (OFF)
→ (OFF)
EXPOSURE SET.
AE MODE
ECLIPSER
(LEVEL)
(GRAY)
VIDEO LEVEL
FLICKERLESS
AGC
SENS UP
DAY&NIGHT
(DETECT TIME)
(FILTER LIMIT)
RETURN END
→ NORMAL
→ ( OFF )
→ ( LOW )
→ ( OFF )
→ -2
→ OFF
→ LOW
→ 4
→ ( AUTO )
→ ( 5sec )
→ ( 10min )