(4) Camera Setup (CAMERA SETUP)
This device is equipped with an external control input terminal (RS-485) and settings for each
function can be changed from an external unit.
For details, refer to “
External Control Input Terminal”
.
Figure 10 CAMERA SETUP menu
ADDRESS
This sets numbers to identify multiple cameras. Up to 30 cameras can be connected.
Note) If these numbers overlap in the system, it won’t operate properly.
COM SPEED
This sets the communication speed with the external unit.
2400, 4800, 9600 and 19200 can be selected.
L. SETUP JUMP
This switches the jump function to jump to “LENS SETUP” screen.
ON: Valid, OFF: Invalid
(5) Lens Setup (LENS SETUP)
This adjusts the back focus and reference voltage for the mechanical iris.
Figure 11 LENS SETUP menu
BACK FOCUS ADJ.
For details, refer to “
Lens: Back Focal Length Adjustment
”
Optical back focus adjustment and lens focus adjustment are possible using this function.
LENS ADJUSTMENT
For details, refer to “
Lens: Lens Adjustment
”.
En-20
CAMERA SETUP
ADDRESS
→
1
COM SPEED
→
4800
L. SETUP JUMP
→
ON
RETURN END
LENS SETUP
BACK FOCUS ADJ.
LENS ADJUSTMENT
RETURN END
